If you’re searching for a powerful, versatile, and cost-effective solution for waterproofing, concrete repair, and construction durability, Shield Super Latex is your go-to product. This technical data sheet (TDS) provides essential information on why Shield Super Latex (Code: Shield 112) is a trusted name in the waterproofing industry since 2009.
What is Shield Super Latex?
Shield Super Latex is a modified Styrene Butadiene Rubber (SBR) latex, designed specifically for high-performance waterproofing and concrete repair applications. Its strong bonding capabilities make it suitable for both old and new concrete, masonry, plaster, and even steel surfaces.
Key Features of Shield Super Latex
- Multipurpose & Easy to Use: Ideal for waterproofing, crack repairs, patching, and bonding.
- Enhances Durability: Increases flexural strength, hardness, and corrosion resistance.
- Prevents Cracking: Reduces shrinkage and dust generation.
- Eco-Friendly: Low VOC, low odor, and breathable formulation.
- Superior Waterproofing: Protects against seepage, dampness, and moisture damage.
Typical Applications
Shield Super Latex is highly versatile and can be used in a wide variety of construction and repair scenarios:
As a Bond Coat
- Perfect for plaster-to-plaster, concrete-to-concrete, and plaster-to-concrete bonding.
- Great for tile installations and surface overlays.
As Waterproofing
- Ideal for bathrooms, toilets, terraces, balconies, sunken slabs, and lift pits.
For Crack Repairs
- Fills cracks >5mm and joint gaps between masonry and RCC structures.
Rebar Coating
- Prevents corrosion of reinforcement bars in concrete.
Concrete Repairs & Mortar
- Used for making polymer-modified mortars for patching, surface finishing, and structural repairs.
Coverage & Mixing Ratio
- Waterproofing Coating:
1 liter covers 70–80 sq. ft. in 2 coats (Ratio: 1 part Shield 112 : 4 parts water : 7 parts cement) - Concrete Repair Mortar:
5 kg Shield 112 + 15 L water + 50 kg cement + 150 kg sand
Application Guide
Surface Preparation
- Remove dust, dirt, and loose particles with wire brushes.
- Degrease and clean using appropriate solvents.
- Roughen the surface for better adhesion.
- Clean rebars and remove rust before coating.
Waterproofing Coat
- Apply first coat with brush.
- After 4–6 hours, apply the second coat.
- Overlay with screed/plaster for final protection.
As a Bond Coat
- Apply the mixed solution as a tack coat before plastering or tiling.
Technical Specifications
| Property | Value |
| Appearance | Free-flowing liquid |
| Color | Milky white |
| Specific Gravity | 1.02 ± 0.02 |
| pH Value | 8–9 |
| Elongation | 10% |
| Chemical Resistance | Resists mild acids & alkalies |
| Waterproofing Test | Passed (Resists up to 20 ft) |
Packaging & Shelf Life
- Available in 5 Liters and 10 Liters containers
- Shelf life: 24 months (store in dry, cool conditions below 30°C)
Safety Instructions
- Use gloves and goggles during application.
- Wash skin thoroughly after contact.
- Keep away from children.
- Avoid using below 4°C or above 34°C.
Why Choose Shield Super Latex?
- Trusted since 2009
- Backed by Enviro-Shield’s commitment to quality
- Proven track record in Bangladesh and Australia
For the best results in waterproofing and construction repair, Shield Super Latex delivers unmatched performance, durability, and value.
📞 Bangladesh Office: +8801613 220101
